- Home
- Masking Materials
- Fiberglass
Fiberglass Heater Tape
Astro Alloys offers fiberglass heater tape, which is well suited for plasma spray applications. Plasma spray fiberglass tape also offers a clean release so it is well suited to be used under other tapes for a clean release.
DeWAL DW468-7
- ADHESIVE 2-SIDES
- DOUBLE COATING PROMOTES A TIGHT SEAL WHEN WRAPPING
- HIGH-TEMPERATURE ADHESIVE
Product Description
This product is a glass cloth tape with an aggressive silicone adhesive on both sides.
Application Information
This tape is designed for high-temperature plasma and flame spray masking.
The use of an overlay when grit blasting may be needed.
The overlapping end is designed not to lift at high-velocity grit blasting or thermal spray.
DeWAL DW468-77
- DOUBLE THICKNESS
- HIGH-TEMPERATURE MASKING
- DOUBLE COATED WITH SILICONE ADHESIVE
Product Description
DW468-77 is a double-layer glass cloth tape with high-temperature silicone adhesive on both sides.
Application Information
Designed for high-temperature plasma and flame spray masking. Double-ply construction for added protection. It is adhesive coated on both sides so it can be used as an overlay for added protection during extreme use.
DeWAL DW 469
- ABRASION AND HEAT RESISTANT
- FAR CERTIFIED
- EXCELLENT TENSILE STRENGTH
- HIGH-TEMPERATURE MASKING
- TOTAL THICKNESS .007”, BACKING THICKNESS .004”, ADHESION 30 OZ./IN.
About DW 469
DW 469 is a pressure-sensitive fiberglass heater tape made of closely woven glass fabric and high-temperature silicone adhesive. The glass fabric has excellent abrasion and heat resistance.
This product meets Federal Aviation Regulation Part 25.855 (a-1).
Application Information
This pressure-sensitive adhesive tape is used primarily in electrical applications including splicing and positioning in coils and support rings, reinforcing slot insulation and armature coil insulation. It is also used in high-temperature applications such as transformers, solenoids, appliances, and thermal spray masking.
